In-house precision manufacturing — Every DW-3600GF unit runs through a four-stage quality check before leaving our Ningjin workshop, with documented test records matching your actual board and edge band samples.
Technical Specifications
| Parameter |
Value |
| Model |
DW-3600GF |
| Product Type |
Full Automatic Compact Edge Banding Machine |
| Total Power |
4.9 kW |
| Voltage & Frequency |
380V Three-Phase Four-Wire (configurable 110V–440V) |
| Overall Dimensions (L×W×H) |
2200 × 650 × 1250 mm |
| Net Weight |
320 kg |
| Edge Banding Type |
Straight Edge Banding |
| Edge Band Height Range |
0–50 mm |
| Edge Band Thickness Range |
0.3–3 mm |
| Minimum Panel Length |
200 mm |
| Feed Speed |
0–14 m/min |
| Trimming Motor Power |
800 W × 2 |
| Trimming Motor Speed |
24,000 r/min |
| Polishing Motor Power |
400 W × 2 |
| Air Supply Requirement |
0.4–0.6 MPa |
| Standard Functions |
Gluing, Trimming, Front & Rear Trimming, Scraping, Polishing, Vacuuming |
| Control System Language |
Chinese / English standard; Spanish or other languages customizable |
| Plug Options |
EU, USA, AU, UK |
| Assembly State |
Fully assembled |
| Certification |
CE |
Application Suitability
| Application |
Material or Output |
| Custom cabinet door edge finishing |
MDF and particleboard with PVC edge band 0.4–2 mm |
| Wardrobe and shelving panel banding |
Melamine-faced board with 0.3–1 mm melamine strip |
| Small-batch furniture production |
Plywood panels with wood veneer banding up to 3 mm |
| Workshop transition from manual to machine banding |
Straight-edge workpieces down to 200 mm minimum length |
Why Voltage Confirmation Must Happen Before the Quote
A machine built for 380V/50Hz will not start on a 440V/60Hz supply — and the damage is not covered under any warranty.
I have watched containers arrive at factories in West Africa and South Asia only to sit idle because the frequency on the nameplate did not match the local grid. The contactors chatter, motors overheat within minutes, and the glue pot never reaches stable temperature. For a Full Automatic Edge Banding Machine OEM factory, confirming the buyer’s actual voltage and frequency before production begins is the single most important step in avoiding a stranded asset [NEED_CITE: voltage and frequency standards by export market]. Every DW-3600GF order starts with an electrical schematic review so the machine ships matched to the facility’s real power supply.
Component Sourcing and Build Traceability
The DW-3600GF is assembled from components we source and inspect under our own quality system, not consolidated from third-party sub-assemblies. Each trimming spindle, polishing head, and pressure roller passes through incoming material inspection before entering the build station. This level of in-house control is what allows a Full Automatic Edge Banding Machine OEM factory to offer private-label branding with confidence — the machine behind the logo is built to a known standard, not an unknown subcontractor’s shortcut.
OEM Branding Beyond the Nameplate
Private-label partnerships require more than printing a distributor’s logo on the enclosure. Control panel overlays, operation manuals, and HMI language screens all carry the partner’s identity. We configure multilingual interfaces — Spanish, Arabic, or other target languages — so the operator in the destination market reads instructions in their own language from day one. This prevents commissioning delays that arise when factory technicians cannot interpret error codes on an unfamiliar display [NEED_CITE: operator language mismatch causing commissioning delays in imported machinery].
Reading the Specs That Matter on the Shop Floor
The 24,000 r/min trimming motor speed on the DW-3600GF directly affects edge finish quality — higher spindle speed produces a cleaner shear cut on PVC and wood veneer, reducing the visible chatter marks that force operators into manual scraping. The 0–14 m/min variable feed speed lets a workshop match throughput to material: slower feeds for thin 0.3 mm melamine strips that tend to chip at high speed, faster feeds for rigid 2–3 mm PVC on long cabinet sides. Air supply at 0.4–0.6 MPa drives the pneumatic pressure rollers; insufficient pressure leaves a visible glue line, while excessive pressure squeezes adhesive past the band edge. The 200 mm minimum panel length is set by the distance between infeed and outfeed roller sets — shorter pieces will not register correctly and should be processed on a dedicated small-part station.
The Hidden Cost of Skipping a Pre-Shipment Material Test
Sending a standard configuration machine to a workshop that uses recycled-content edge banding is a predictable failure. The glue temperature and roller pressure calibrated for virgin PVC will not bond properly to recycled material, and the banding peels off within days of installation. I have stood in factories where three days of production were lost because no one ran a sample test before shipping. A Full Automatic Edge Banding Machine OEM factory that skips the material compatibility check is passing the cost of reconfiguration onto the buyer [NEED_CITE: adhesive bonding failure on recycled edge banding materials].
Why OEM Buyers Source from This Facility
Every DW-3600GF is built under the same four-stage quality system — incoming material, in-process, finished product, and pre-shipment verification — so repeat orders ship with consistent tolerances across batches. Voltage and plug customization (EU, USA, AU, UK) is handled as a standard option rather than a special request, which shortens lead times for distributors stocking multiple markets. The patented cutting mechanisms on trimming and scraping stations deliver a verifiable tolerance that buyers can check on arrival, not a claim that disappears once the crate is opened. Factory visits are open at any stage of production, allowing OEM partners to audit assembly practices and QC checkpoints in person. Full customs documentation — CE declaration, electrical schematics, packing photographs — ships with every unit so importers clear their own market’s regulatory requirements without delays [NEED_CITE: CE machinery directive documentation requirements for woodworking equipment imports].
Documentation & Verification
- CE declaration of conformity covering the DW-3600GF mechanical and electrical safety scope
- Electrical schematic with confirmed voltage, frequency, and plug type before production begins
- Factory test record showing glue bond strength on your submitted edge band and panel samples
- Operation and maintenance manual printed in the operator’s agreed language
- Pre-shipment photographs documenting machine condition, packing, and container loading
Installation, Commissioning & Support
- Requires a level concrete floor and 380V three-phase dedicated circuit rated for the 4.9 kW total load
- Arrives fully assembled — position, connect power and 0.4–0.6 MPa air line, and run the first test panel
- Glue pot temperature and roller pressure calibrated on-site to match your specific banding material
- Trimming and scraping offsets adjusted against your panel thickness range (0.3–3 mm band, standard board stock)
- Spare polishing wheels and trimming cutters included for initial operating period
What We Need to Configure Your Machine
Send us the edge banding material and board substrate you actually run in production, along with your workshop’s supply voltage and frequency. If you are evaluating this model for a regional distribution line, let us know which plug standard and control panel language each destination market requires. We can arrange a sample processing test on your materials before you commit to a production order.
Frequently Asked Questions
Q: What OEM and private-label options are available for the DW-3600GF?
A: We apply your brand logo to the enclosure, customize the control panel language and color scheme, and produce operation manuals under your company name. Voltage, frequency, and plug type are configured to each target market. Private-label partners receive the same four-stage QC documentation as our own-brand machines, ensuring consistent quality across all territories you distribute to.
Q: How does the four-stage QC process work on each unit?
A: Incoming materials are inspected before assembly begins. During the build, each station — gluing, trimming, scraping, polishing — is verified independently. The completed machine runs a full functional test under load. Before packing, a pre-shipment verification confirms electrical safety, pneumatic integrity, and edge finish quality on your specified material, with photographs and test records included in the shipment file.
Q: Can the DW-3600GF be modified to non-standard specifications?
A: Yes. We accept custom requirements for feed speed range, additional function stations, or non-standard panel height capacity beyond the 50 mm standard. Each modification is reviewed by our engineering team for mechanical and electrical compatibility before a formal quotation is issued, typically within one working day of receiving your specification request.
Q: What documents are provided for customs clearance in my country?
A: Each shipment includes the CE declaration of conformity, commercial invoice, packing list, bill of lading, and the machine’s electrical schematic. Additional documents such as certificate of origin or fumigation certificates can be arranged through our logistics team. Confirm your local import requirements early so the correct paperwork is prepared before the container is sealed.
