Precision-ground assembly and verifiable OEM output — Every DW802 unit leaves our Ningjin floor with a signed factory test record covering glue spread, trim accuracy, and vacuum hold on your specified panel stock.
Technical Specifications
| Parameter |
Value |
| Model |
DW802 |
| Product Type |
Automatic Edge Banding Machine |
| Total Power |
4200W |
| Voltage Options |
220V / 380V / custom configuration (50Hz or 60Hz to be confirmed) |
| Standard Functions |
Gluing, trimming, polishing, automatic head/tail cutting, vacuum |
| Minimum Sheet Length |
25 cm |
| Minimum Sheet Width |
10 cm |
| Edge Banding Height |
0–50 mm |
| Edge Banding Thickness |
0.3–3 mm |
| Edge Feed Power |
140W |
| Transmission Power |
140W |
| Trimming Power |
800W × 2 |
| Polishing Power |
180W × 2 |
| Vacuum Power |
1200W |
| Air Source Pressure |
0.4–0.8 MPa |
| Glue Pot Capacity |
4000 ml |
| Overall Dimensions (L×W×H) |
130 × 60 × 95 cm |
| Net Weight |
135 kg |
| Control System |
Standard relay panel; PLC available on request (basis to be confirmed) |
| Language Options |
Chinese and English standard; Spanish and other languages available on request |
| Plug Options |
EU, USA, AU, UK |
| Assembly State |
Fully assembled, wooden box packed |
| Feed Speed |
Not stated in source (basis to be confirmed) |
| Tolerance |
Not stated in source (basis to be confirmed) |
Application Suitability
| Application |
Material or Output |
| Custom furniture panel edge sealing |
MDF, particleboard, ecological board |
| Cabinet and wardrobe component finishing |
Plywood, solid wood panels |
| Home decoration workshop production |
PVC and veneer edge banding (0.3–3 mm) |
| Small-batch joinery runs |
Panels from 25 cm length and 10 cm width |
Why Voltage Confirmation Must Come Before the Order Sheet
A machine wired for 380V/50Hz will sit idle on a 220V/60Hz shop floor — and the return freight is never cheap.
I once worked with a Middle Eastern importer who purchased a batch of edge banders for local furniture workshops. The order moved fast, but nobody confirmed whether the destination workshops ran 220V single-phase or 380V three-phase. When the containers arrived, roughly half the machines could not start without an external transformer the buyer had not budgeted for [NEED_CITE: voltage and frequency standards by export market]. That experience shaped how I handle every Automatic Edge Banding Machine OEM inquiry now: I ask for the local voltage and frequency before I quote anything else. With the DW802, the base configuration covers 220V and 380V, and we build custom windings when a market falls outside that range. The point is to decide this on paper, not after the crate is open on the warehouse floor.
Private Label and Branding Scope for Distributors
The DW802 is built for Edge Banding Machine factory partners who need their own branding on a proven platform. Logo placement covers the main body panel, the control fascia, and the wooden crate exterior. We match paint codes to your existing product family so the machine looks native to your catalogue rather than borrowed from someone else’s.
OEM Configuration Beyond Cosmetics
Custom voltage and frequency windings are only the starting point. Control panel language, plug type, safety labelling, and manual translation are all configurable before the unit enters final assembly [NEED_CITE: CE machinery directive requirements for industrial equipment]. A distributor serving Spanish-speaking Latin America receives a different operator interface than one stocking for the Australian market, and we document each variation in the packing photographs so your receiving team can verify at a glance.
What the Specification Table Actually Means for the Shop Floor
The 4000 ml glue pot is sized to keep the DW802 running through extended production runs without constant refills, which matters when a workshop is pushing full sheets of particleboard through back to back. Trimming runs at 800W per side — two independent motors — giving enough torque to cleanly remove PVC overhang on boards up to the 0.3–3 mm banding thickness range without chipping. The vacuum circuit at 1200W holds panels firmly against the fence, reducing the drift that causes visible glue lines on lighter substrates like thin MDF. Air pressure between 0.4 and 0.8 MPa feeds the pneumatic cylinders controlling head and tail cutters; shops with a weaker compressor will see inconsistent cuts on the board ends, so we always ask about the existing air system before finalizing an order.
The Hidden Cost of Skipping Configuration Verification
When a distributor orders a generic voltage machine without specifying the destination grid, the local workshop either buys a step-up transformer or runs the motor at reduced torque — both paths shorten motor life. When the control panel language does not match the operator’s reading ability, commissioning stalls until someone improvises translation, and the machine settings never get dialed in properly [NEED_CITE: industrial equipment commissioning challenges in export markets]. These are not manufacturing defects. They are procurement gaps that surface only after the Automatic Edge Banding Machine OEM unit is bolted to the floor.
Manufacturing Depth You Can Audit
Our Ningjin facility handles precision grinding of the feed chain and fence surfaces in-house, which is where edge quality is really decided. The DW802 goes through a four-stage QC process — incoming material, in-process assembly, finished product, and pre-shipment verification — with each stage signed off by a dedicated inspector. Factory visits are open to any distributor or OEM partner evaluating our production depth, and we can run your sample panels on the line during the visit. Custom logo application, crate marking, and documentation packaging are completed on the same floor, so there is no third-party handoff between manufacturing and branding.
Documentation & Verification
- CE declaration of conformity covering the DW802 electrical and mechanical safety requirements
- ISO 9001 certificate for the manufacturing quality management system
- Machine specification sheet matching your confirmed voltage and language configuration
- Factory test record on your specified panel thickness and edge banding material before dispatch
- Electrical schematic with voltage confirmation for local electrician reference
- Operation and maintenance manual translated into the agreed operator language
Installation, Commissioning & Support
- Floor space requirement of 130 × 60 cm footprint plus operator clearance on the feed side
- Dedicated electrical circuit matching confirmed voltage — 220V single-phase or 380V three-phase as ordered
- Arrives fully assembled in a wooden crate; position and level on a flat concrete surface
- First-run glue temperature and trim depth calibration performed with your sample panels
- Spare parts list covering trim blades, polish wheels, and feed chain segments included in the crate
- Routine maintenance schedule tied to the 4000 ml glue pot cleaning cycle and pneumatic filter checks
Before You Request a Quote
To size the DW802 correctly for your market, we need the primary panel materials your customers process — MDF, particleboard, plywood, or solid wood — and the edge banding thickness range they typically run. Share the destination country’s standard voltage and frequency, and we will confirm the winding configuration and plug type in the initial proposal. If you carry multiple brands already, let us know your existing colour scheme and logo format so we can prepare OEM artwork proofs before production starts.
Frequently Asked Questions
Q: What OEM customization is available on the DW802?
A: Logo placement on the body panel, control fascia, and crate exterior. Custom voltage from 110V to 440V, frequency matched to 50Hz or 60Hz grids. Control panel language, plug type, safety labelling, and manual translation are all configurable. Paint colour matching to your existing product line is available on request.
Q: Can I visit the factory or request a sample test run?
A: Factory visits are welcome and we can run your sample panels on the DW802 during the visit. For remote partners, we perform a recorded sample test using your specified panel material and edge banding stock, and share the video along with the factory test record before shipment.
Q: How do I confirm voltage and plug standards for multiple export markets?
A: Provide the destination country list at the inquiry stage. We match each order to the local grid standard and supply the corresponding plug type — EU, USA, AU, or UK. For markets outside those four plug formats, custom wiring and plug fitting is confirmed before production begins.
Q: What is the spare parts supply arrangement for distributors?
A: A spare parts list ships with every DW802, covering trim blades, polish wheels, and feed chain wear components. Distributors can order replacement sets with each shipment or place standalone spare parts orders. We confirm availability and lead time for each parts batch before invoicing.
Q: What is the typical production lead time for OEM orders?
A: Standard production runs follow typical multi-week lead times from artwork and specification confirmation. Complex OEM configurations requiring custom voltage windings or non-standard language panels may extend the schedule. We provide a confirmed dispatch date once all configuration details are locked in.
